Change The Programme Default Settings; Select Additional Programme Settings28; Placing Laundry Into The Drum; Measure And Add Detergent And Care Products - Siemens WM14T69XZA Instruction Manual And Installation Instructions

Table of Contents

Advertisement

Operating the appliance
en
In appliances with a drum light:
The drum is lit after switching on the
appliance, after opening and closing the
door and after starting a programme.
The light switches off automatically.
You can:
Use this programme and load
laundry. ~ Page 28
Or select another programme.
You can find an overview of all
programmes on the printed
supplement for the installation and
operating instructions.
Or change the programme default
settings. ~ Page 28
And/or select additional programme
settings. ~ Page 28
Change the programme
default settings
To change the current settings, touch
the button you require on the control
panel and the relevant indicator will
switch to full brightness.
You can change Finish in-time by
touching N or M.
Programme default settings
~ Page 24
Select additional programme
settings
By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
To do this, touch the required control
panel; the relevant display switches to
full brightness.
Additional programme settings
~ Page 26
28

Placing laundry into the drum

:
Warning
Danger of death!
Items of laundry pretreated with
cleaning agents that contain solvents,
e.g. stain remover/cleaning solvent,
may cause an explosion after being
loaded into the washing machine.
Hand-rinse these items of laundry
thoroughly beforehand.
Notes
Mix items of laundry of varying
sizes.Laundry items of different sizes
distribute themselves better during
the spin cycle.Individual laundry
items may cause an unbalanced
load.
Observe the maximum specified
load. Overfilling adversely affects the
washing result and promotes
creasing.
Unfold presorted laundry items and
1.
place them in the drum.
Make sure that no items of laundry
2.
are trapped between the door and
the rubber seal, and close the door.
Measure and add detergent
and care products
In most programmes, your appliance
can dose your detergent and fabric
softener automatically. Automatic
dosing is activated at the factory for all
the designated programmes and it can
be adjusted to suit your requirements.
~ "Automatic dosing" on page 31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wm t series

Table of Contents