Inserting The Measuring Aid For Liquid Detergent; Adding Detergent And Care Product; Starting The Programme; Changing The Activated Programme End Time - Siemens WM12N1M7GR User Manual And Installation Instructions

Hide thumbs Also See for WM12N1M7GR:
Table of Contents

Advertisement

13.5 Inserting the measuring
aid for liquid detergent
If you order the measuring aid as an
accessory, you must use the measur-
ing aid.
Pull out the detergent drawer.
1.
Press down on the insert and re-
2.
move the detergent drawer.
Insert the measuring aid.
3.
Insert the detergent drawer.
4.
13.6 Adding detergent and
care product
Notes
¡ Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
¡ Observe the information about de-
tergents and care products
→ Page 28.
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 17
If required, add the care product.
3.
Push in the detergent drawer.
4.
13.7 Starting the programme
Requirement: A programme is set.
→ "Setting a programme", Page 28
Press Έναρξη / Προσθήκη
ρούχων.
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows the programme
duration or the programme end
time.
a After the programme has ended,
the display shows: "End".
13.8 Changing the activated
programme end time
You can repeatedly change the set
and activated programme end time
before starting the programme.
Requirements
¡ The programme is set.
→ "Setting a programme", Page 28
¡ The programme end time is set
and activated.
→ "Buttons", Page 22
Press Έναρξη / Προσθήκη
1.
ρούχων.
The activated programme end time
is paused.
Press Λήξη σε
2.
shows the required programme
end time.
Press Έναρξη / Προσθήκη
3.
ρούχων.
The changed programme end time
is activated.
operation en
until the display
29

Advertisement

Table of Contents
loading

Table of Contents