Advertisement
Quick Links
IPGS-0204DSFP
4 10/100/1000T + 2 Dual Speed SFP Industrial Switch w/4 PoE 802.3 at/af Injectors
Quick Installation Guide
Introduction
The Lantech IPGS-0204DSFP is a cost-effective solution, which meets the high reliability requirements demanded by
industrial applications. Besides, the equipment meets IEEE 802.3at standard, the switch can provides 30 Watts output per
PoE port for Powered Devices. The switch supports wide operating temperature, range from -40°C to 75°C.
The IPGS-0204DSFP is designed to meet the demands of Industrial environments, comes packaged in a robust IP30
housing and has been tested extensively to meet Industrial EMI and EMC standards. Rigorous mechanical testing has
also been undertaken to comply with free fall, shock and vibration stability test requirements.
With voltage boost design, the IPGS-0204DSFP can work from 24V input power source and boost the voltage to 48VDC
to feed the PoE power over Ethernet cable for any vehicles that usually has 24V power source. The slim compact design
is able to fit in variety of cabinets and space.
Housing Dimension
1
Advertisement
Related Manuals for Lantech IPGS-0204DSFP
Summary of Contents for Lantech IPGS-0204DSFP
- Page 1 With voltage boost design, the IPGS-0204DSFP can work from 24V input power source and boost the voltage to 48VDC to feed the PoE power over Ethernet cable for any vehicles that usually has 24V power source. The slim compact design is able to fit in variety of cabinets and space.
-
Page 2: Led Indicator
Installation package This unit can be installed by din-rail mounted or wall-mounted. Din-rail brackets and wall-mounted bracket are included. Power and alarm relay connection The PWR1 and PWR2 can be redundant with each other or you can use one of them to supply the switch. The middle contact was designed for alarm relay connection. - Page 3 Recommendation for Shielded network cables STP cables have additional shielding material that is used to reduce external interference. The shield also reduces the emission at any point in the path of the cable. Our recommendation is to deploy an STP network cable in demanding electrical environments. Examples of demanding indoor environments are where the network cable is located in parallel with electrical mains supply cables or where large inductive loads such as motors or contactors are in close vicinity to the camera or its cable.