Ozito Power X Change PX5PAK-005 Instruction Manual
Ozito Power X Change PX5PAK-005 Instruction Manual

Ozito Power X Change PX5PAK-005 Instruction Manual

Cordless angle grinder

Advertisement

Quick Links

CORDLESS
ANGLE GRINDER
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage:
18V
No Load Speed:
8500/min
Disc Diameter:
115mm (4
")
1/2
Spindle:
M14
Charge Time:
40mins (2.0Ah)
80mins (4.0Ah)
Weight:
1.8kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specified
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
WHAT'S IN THE BOX
Cordless Drill Driver
& Impact Driver
Cordless Angle Grinder
Cordless Circular Saw
& LED Torch
2.0Ah, 4.0Ah Battery & Fast
Charger
PX5PAK-005
0317

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Power X Change PX5PAK-005 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ozito Power X Change PX5PAK-005

  • Page 1 Charge Time: 40mins (2.0Ah) & LED Torch 80mins (4.0Ah) Weight: 1.8kg ozito.com.au 2.0Ah, 4.0Ah Battery & Fast Charger PX5PAK-005 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 2: Know Your Product

    SETUP & PREPARATION KNOW YOUR PRODUCT CORDLESS ANGLE GRINDER (PXAGS-500) 1. ASSEMBLY 1 Spindle Lock 5 Sure Grip Handle 2 Guard Locking Lever 6 Battery Seating WARNING! ENSURE THE TOOL IS SWITCHED OFF AND 3 Side Handle 7 Pin Wrech THE BATTERY IS REMOVED BEFORE PERFORMING ANY OF THE FOLLOWING TASKS.
  • Page 3: Battery And Charging

    2. REPLACING A GRINDING DISC 3. BATTERY & CHARGING CAUTION: THE CHARGER FOR THIS PRODUCT SHOULD 1 Depress and hold the BE PROTECTED BY A RESIDUAL CURRENT DEVICE spindle lock to prevent (RATED AT 30MA OR LESS). the spindle spinning. Charging your lithium ion battery - Fast Charger 1 Connect the charger into a mains power outlet.
  • Page 4: Operation

    OPERATION 4. GRINDING Turning On and Off Charging your lithium ion battery - Eco Charger 1 To turn on, slide the lock-on 2 To turn off, slide the lock-on 1 Connect the charger into a mains power outlet. switch across to the right and switch back and to the left.
  • Page 5: Troubleshooting

    Always wear ear, eye and Wear eye protection a safety mask Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the angle grinder by an unauthorised person or by mishandling of the angle grinder.
  • Page 6: Electrical Safety

    The power supply for this products charger should be protected by a residual current device (rated at 30mA Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. or less). A residual current device reduces the risk of electric shock.
  • Page 7: Warranty

    32mm @ 45° Charge Time: 40mins (2.0Ah) 80mins (4.0Ah) Weight: 2.4kg ozito.com.au 2.0Ah, 4.0Ah Battery & Fast Charger PX5PAK-005 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 8 KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS CIRCULAR SAW (PXCSS-500) 1. BATTERY & CHARGING 1 Battery Seating 9 Rip Fence Locking Knob 2 Rear Handle 10 Depth Locking Lever CAUTION: THE CHARGER FOR THIS PRODUCT SHOULD 3 Dust Port 11 Blade Guard Lever BE PROTECTED BY A RESIDUAL CURRENT DEVICE (RATED AT 30MA OR LESS).
  • Page 9 2. FITTING THE BATTERY & GUIDE Inserting & Removing the Battery Charging your lithium ion battery - Eco Charger 1 Connect the charger into a mains power outlet. 1 Slide the battery into the seating 2 The charger LED will flash green at the back of the saw until it showing power is being supplied clicks into place.
  • Page 10 3. DEPTH & BEVEL ADJUSTMENT 4. CONTROLS Turning On and Off WARNING! ENSURE THE TOOL IS SWITCHED OFF AND THE BATTERY IS REMOVED BEFORE PERFORMING ANY 1 Press and hold the lock-off level OF THE FOLLOWING TASKS. in either direction. Depth Adjustment Depth should be adjusted so that no more than one tooth is protruding through the timber.
  • Page 11: Making A Cut

    OPERATION 5. MAKING A CUT 6. BLADE FITMENT The tool is recommended for wood cutting only and is not recommended 1 Mark the cutting line on the work for use with abrasive wheels or masonry/diamond cutting wheels. Only use piece. 150mm wood cutting blades.
  • Page 12 Always hold the soft grip handle with one hand and the front handle with the other. Note: Ozito Industries will not be responsible for any damage or injuries Maintain a firm grip and operate the on/off switch with a positive action.
  • Page 13 Check with your local council authority for recycling advice. For further information, or any parts not listed here, visit www.ozito.com.au or contact Ozito Customer Recycling packaging reduces the need for landfill and raw materials. Reuse of recycled material decreases pollution in the environment.
  • Page 14: Circular Saw Safety Warnings

    Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. The power supply for this products charger should be protected by a residual current device (rated at 30mA or less). A residual current device reduces the risk of electric shock.
  • Page 15 & LED Torch Charge Time: 40mins (2.0Ah) 80mins (4.0Ah) Weight: 1.1kg ozito.com.au 2.0Ah, 4.0Ah Battery & Fast Charger PX5PAK-005 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 16 KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS DRILL DRIVER 1. BATTERY & CHARGING (PXDDS-201) 1 Keyless Chuck 5 Belt Clip CAUTION: THE CHARGER FOR THIS PRODUCT SHOULD 2 Torque Adjustment Collar 6 Forward/ Reverse Lever BE PROTECTED BY A RESIDUAL CURRENT DEVICE 3 Variable Speed Trigger 7 Gearbox speed selector (RATED AT 30MA OR LESS).
  • Page 17: Battery Installation

    2. BATTERY INSTALLATION Installing the Battery Pack Charging your lithium ion battery - Eco Charger 1 Connect the charger into a mains power outlet. 1 Slide the battery into the drill base until it clicks into place. 2 The charger LED will flash green showing power is being supplied to the charger.
  • Page 18 OPERATION 3. KEYLESS CHUCK 4. CONTROLS Forward/ Reverse Lever WARNING! Ensure the tool is turned off & disconnected from the power supply before performing any of the following operations. 1 For forward rotation, push the fwd/rev lever towards the left side of the drill. For reverse rotation push fwd/rev lever to the right.
  • Page 19: Helpful Tips

    6. HELPFUL TIPS 5. DRILLING Before starting to drill, perform a few simple checks. Drilling to a Preset Depth 1 Depress and release the variable 2 Check the forward/reverse lever A simple way of achieving a hole at a desired depth is to use masking tape. speed trigger to ensure it is not is on desired setting.
  • Page 20 Variable speed trigger is locked Note: Ozito Industries will not be responsible for any damage or injuries caused by repair of the drill by an unauthorised person or by mishandling. Ensure that the forward / reverse lever is in the correct position; pressed left for forwards direction, pressed right for backwards direction.
  • Page 21 This charger is not intended for any uses other than charging rechargeable batteries. Any other use may result in risk of visit www.ozito.com.au or contact Ozito Customer fire, electric shock or electrocution. Do not place any object on top of the charger or place the charger on a soft surface that may result in excessive internal Service: heat.
  • Page 22: Drill Driver Safety Warnings

    The power supply for this products charger should be protected by a residual current device (rated at 30mA Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. or less). A residual current device reduces the risk of electric shock.
  • Page 23 & LED Torch Charge Time: 40mins (2.0Ah) 80mins (4.0Ah) Weight: 1.4kg ozito.com.au 2.0Ah, 4.0Ah Battery & Fast Charger PX5PAK-005 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 24 KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS IMPACT DRIVER (PXIDS-300) 1. ASSEMBLY 1 Drive Bit Retaining Ring 4 Belt Hook 2 Tri-Beam LED Light 5 Forward/ Reverse Lever WARNING! ENSURE THE TOOL IS SWITCHED OFF AND 3 Variable Speed Trigger THE BATTERY IS REMOVED BEFORE PERFORMING ANY OF THE FOLLOWING TASKS.
  • Page 25 2. BATTERY & CHARGING Charging your lithium ion battery - Eco Charger CAUTION: THE CHARGER FOR THIS PRODUCT SHOULD 1 Connect the charger into a mains power outlet. BE PROTECTED BY A RESIDUAL CURRENT DEVICE (RATED AT 30MA OR LESS). 2 The charger LED will flash green showing power is being supplied Charging your lithium ion battery - Fast Charger...
  • Page 26: Driving Procedure

    OPERATION 3. CONTROLS 4. DRIVING PROCEDURE Variable Speed Trigger 1 Depress and release the on/off 2 Check the forward/reverse lever trigger to ensure it is not locked. is on desired setting. 1 To start the driver, squeeze the 2 Release the variable speed variable speed trigger.
  • Page 27 Recycle battery Do not put in the rubbish Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the impact driver by an unauthorised person or by mishandling of the Do not incinerate Do not get battery wet impact driver.
  • Page 28: Impact Driver Safety Warnings

    The power supply for this products charger should be protected by a residual current device (rated at 30mA or less). A residual current Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand.
  • Page 29 Charge Time: 40mins (2.0Ah) & LED Torch 80mins (4.0Ah) Weight: 0.2kg ozito.com.au 2.0Ah, 4.0Ah Battery & Fast Charger PX5PAK-005 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 30 KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS LED TORCH (PXTLS-905) 1. BATTERY & CHARGING 1 LED Light 4 Sure Grip Handle 2 Rotating Head 5 Battery Seating CAUTION: THE CHARGER FOR THIS PRODUCT 3 On/Off Switch 6 Hanging Hook SHOULD BE PROTECTED BY A RESIDUAL CURRENT DEVICE (RATED AT 30mA OR LESS).
  • Page 31: Fitting The Battery

    2. FITTING THE BATTERY Inserting & Removing the Battery Charging your lithium ion battery - Eco Charger 1 Connect the charger into a mains power outlet. 1 Align the ribs of the battery with the recess at the base of the torch and 2 The charger LED will flash green push in until it clicks into place.
  • Page 32: Adjusting The Angle

    OPERATION 3. ADJUSTING THE ANGLE 4. SWITCHING THE TORCH ON & OFF 1 To turn the torch on, Adjusting the Rotating Head press the on/off switch. The torch head can be adjusted through a 90° rotation to aim the light at the desired area.
  • Page 33 New Zealand 0508 069 486 E-mail: enquiries@ozito.com.au Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the torch by an unauthorised person or by mishandling of the torch. CARING FOR THE ENVIRONMENT Power tools that are no longer usable should not be disposed of with household waste but in an environmentally friendly way.
  • Page 34 Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid a hazard.

Table of Contents