Advertisement
SAFETY DEVICES AND WARNING LABELS
Warning label
against pinching
This label warns
that fingers or
other parts of
human body can
be pinched in the
thread take-up
lever.
Finger guard
This is a cover for
preventing contact
between fingers
and the needle.
(For CE type)
In addition, be aware that the safety devices such as the "eye protection cover" and "finger
guard" are sometimes omitted in the sketches, illustrations and figures included in the Instruc-
tion Manual for the explanation's sake. In the practical use, never remove those safety devices.
Thread take-up
lever cover
This is a switch for disconnect-
This is a cover for
ing the power unit of the sewing
preventing contact
machine from the power supply.
between the human
(Sewing machine for export in
body and the thread
general and for China type)
take-up lever.
* The mounting location and
Warning label against
pinching
This is the caution label
to protect fingers, etc.
from being caught be-
tween the bed and table
during maintenance.
The label gives the
minimum precau-
tions to be taken
when operating the
sewing machine.
CAUTION
Power switch
shape of the power switch
differs with the place of
destination.
Warning label
against pinching
This label indi-
cates that there is
a risk of pinching
fingers under the
control box.
Warning label
(Refer
to the
warning
label on
page i.)
This is a switch for disconnecting the power unit
of the sewing machine from the power supply.
Selection of the power switch (EU type)
Be sure to use the IEC60204-1-compliant power
switch with rated current of 20A or more and
short-circuit breaking capacity of 120 A or more.
vii
High-voltage
caution label
This label
warns that there
is a high-volt-
age part inside
cover.
Pulley cover
This is a cover for
preventing entan-
glement of hands,
hair and clothes by
the hand pulley.
Power switch
Advertisement
