Safety Devices And Warning Labels - JUKI MB-373N/BR10 Instruction Manual

Warning label against
This label indicates that
there is a risk of contact
between hands and fingers
and the button carrier.
Needle bar cover
This is a cover for pre-
venting contact between
the human body and the
needle bar.
Eye protection cover
This is a cover for prevent-
ing eye injury due to flying
pieces of button broken by
needle breakage.
Looper cover
This is a cover for
preventing contact
between the human
body and the looper
section.
Electrical-shock
danger label
In order to protect
against electrical
shock, safety pre-
(EU type)
cautions to be tak-
en to avoid danger
are written on this
label.
In addition, be aware that the safety devices such as the "eye protection cover" and "finger guard"
are sometimes omitted in the sketches, illustrations and figures included in the Instruction Manual
for the explanation's sake. In the practical use, never remove those safety devices.

Safety devices and warning labels

pinching
Warning label
The label gives
t h e m i n i m u m
precautions to
be taken when
o p e r a t i n g t h e
sewing machine.
(Refer to
"Electri-
cal-shock
danger
label" on
page i.)
CAUTION
This is a cover for
(Refer
preventing entangle-
to the
ment of hands, hair
warning
and clothes by the
label on
V-belt.
page i.)
Pulley cover
This is a cover for
preventing entangle-
ment of hands, hair
and clothes by the
V-belt.
vi
Belt cover
Power switch
This is a switch for discon-
necting the power unit of
the sewing machine from
the power supply.
Power switch (EU type)
T h i s s w i t c h i s
used for discon-
necting the power
unit of the sew-
ing machine from
the power supply.
It is also used as
t h e e m e r g e n c y
stop switch.
Selection of the power switch
Use the IEC60204-1-compli-
ant power switch with rated
current of 20 A or more and
short-circuit breaking capac-
ity of 120 A or more, which
has the operating section in
red against the yellow back-
ground.