Advertisement
Thread take-up lever
cover
This is a cover for
preventing contact
between the human
body and the thread
take-up lever.
Eye protection cover
This is a cover for
protecting eyes from
being injured by a
broken needle.
Warning label
against pinching
This label indi-
cates that there is
risk that the posi-
tioning gauge can
contact the hand
or any other part
of the operator
when it is moving.
Finger guard
This is a cover for
preventing contact
between fingers and
the needle.
Warning label
against pinching
This label indicates
that there is a risk
that the operator's
hands can be caught
under the sub table.
Warning label
against pinching
This label warns
that hands can be
pinched under the
sewing machine.
Electrical-shock
danger label
In order to protect
against electrical
shock, safety pre-
(EU type)
cautions to be taken
to avoid danger are
written on this label.
In addition, be aware that the safety devices such as the "eye protection cover" and "finger guard"
are sometimes omitted in the sketches, illustrations and figures included in the Instruction Manual
for the explanation's sake. In the practical use, never remove those safety devices.
Safety devices and warning labels
Warning label against pinching
This label warns that fingers or other
parts of human body can be pinched
in the thread take-up lever.
Warning label
The label gives the
minimum precau-
tions to be taken
when operating the
sewing machine.
(Refer to
"Electri-
cal-shock
danger
label" on
page i.)
(Refer
to the
warning
label on
page i.)
CAUTION
vi
Motor cover
This is a cover for preventing con-
tact between the motor, gear, fan
and pulley and the human body.
Warning label
against pinching
The purpose of
this label is to
warn the opera-
tor to be careful
to prevent pinch-
ing of the human
body in the
presser foot and
related parts.
Warning label
against pinching
This label indicates
that there is a risk
that the feed plate
can contact the
hand or any other
part of the operator
when it is moving.
Power switch
This is a switch for discon-
necting the power unit of the
sewing machine from the
power supply.
Power switch (EU type)
This switch is used
for disconnecting
the power unit of
the sewing machine
from the power sup-
ply. It is also used
as the emergency
stop switch.
Selection of the power switch
Use the IEC60204-1-compli-
ant power switch with rated
current of 20 A or more and
short-circuit breaking capac-
ity of 120 A or more, which
has the operating section in
red against the yellow back-
ground.
Advertisement
