Table of Contents
Advertisement
■1.
Individual louver (Select wind direction for each air outlet)
You can set the wind direction for each outlet of indoor units that have 4-way air discharge.
NOTE
• This function may not be available, depending on the model of the indoor unit.
• This function can only be set while the air conditioner is operating.
▼ 4-way air discharge type
Electrical control
box
Refrigerant
pipe
Drain pipe
NOTE
• For models that "Individual louver" is not available, the message "No function" is displayed.
• Press [
] or [
] while swinging to stop the louvre and cancel swinging, press [
direction.
• For group connections, refer to <When multiple indoor units are connected as a group (group connection)>. (Page 57)
• "
" is displayed when "Louver lock" is set. That louvre cannot do "Individual louver". (Page 22)
1
In "Menu" (Page 17), select "Individual
louver", and press [
2
Press [
Louvre 1
3
Press [
direction
For details, refer to <Changing the wind direction>.
(Page 13)
4
Press [
Return to "Menu".
▼ Compact 4-way air discharge type
Receiver
installation
position
Electrical control
– 20 –
Set/Fix]
] and [
] to select louvres
Louvre 4
Louvre 2
Louvre 3
] and [
] to select wind
Return]
box
Drain pipe
Refrigerant pipe
] or [
] again to select an wind
Owner's Manual
All louvres
Receiver
installation
position
EN
Advertisement
Table of Contents
