Technical Specifications; Technical Support - Baileigh HPB-20 Operator's Manual

TECHNICAL SPECIFICATIONS

Pressure
Punch Height
Included Die V-Grooves
Included Punch
Cylinder Stroke Length x Diameter
Table Height
Maximum Hydraulic Pressure
Working Speed
Return Speed
Stroke Accuracy
Digital Readout
Fixture Holes*
Power
Motor
Gross Weight
Shipping Dimensions (Inches)
* 2" fixture post sold separately.

TECHNICAL SUPPORT

Our technical support
service@jpwindustries.com, and asking for the technical support. Tech Support handles
questions on machine setup, schematics, warranty issues, and individual parts needs: (other than
die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
baileigh-sales@jpwindustries.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate technique
only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.
20 tons
6" (152.4mm)
2" and 2.5" (50.8mm and 63.5mm)
40°
12" x 4" (304.8 x 101.6mm)
39" (990.6mm)
2750 psi
.51" / second (12.954mm / second)
.78" / second (19.812mm / second)
+/– .002" (0.0508mm)
Yes, Cylinder Extension Setting
1 @ 3"Ø / 3 @ 2"Ø
230V, 3ph, 60hz
5 hp (3.7kw), 230V, 3ph, 60hz, 13.4A, 1720rpm
1350lbs (613kgs)
60" x 48" x 55" (1524 x 1219 x 1397mm)
department can be reached at
9
9
920.684.4990 or Baileigh-