Advertisement
Main
Sub
Contents
code
code
46
32
Copier color reproduction
setting (COLOR
REAPPEAR)
39
FAX mode sharpness
adjustment (Executable only
when the FAX is installed.)
[Function]
Used to set color reproduction in each mode. Colors easy to be copied and colors difficult to be copied
can be switched.
Set value
Colors easy to be copied
0
Purple, Blue, Red
1
Water blue, Green, Blue
2
Yellow, Red, Green
∗
This setting has virtually no effect on black-and-white documents.
When this test command is executed, warm-up and shading are performed and the current set value
is displayed. (Default: 0)
Press [START] key to make a copy under the set conditions . At that time, color components are
changed for used in copying.
To change the mode, press [
LCD.
Specification component
Green
Red
Blue
Mode
AE mode (including TS)
TEXT mode (including TS)
PHOTO mode
[Operation]
The operation is similar to test command 46-01.
[Function]
When [START] key is pressed, scan is started with the entered sharpness adjustment value, and the
data of the selected mode stored on the FAX side is changed to the entered value.
Sharpness adjustment value data table
Mode
1: STD
2: FINE
3: S-FINE
4: FINE/PHOTO
5: S-FINE/PHOTO
When initializing each data: 1
[Operation]
1) Initial display
SHARPNESS SETTING
←
→
PRESS
,
2) [←/→] or after 2sec
Every time when [→] key is pressed, the
second line is changed in the sequence of
No. 1 → 2 → 3 → 4 → 5 → 1.
When [←] key is pressed, the sequence is
reversed.
SHARPNESS SET (1-5)
1:STD
3) Select the arrow key 1-5, and the LED of
[START] key is lighted.
SHARPNESS SETTING
ZZZZ(0-2)
("ZZZZ" is the mode selected among STD,
FINE, S-FINE, FINE/PHOTO, and S-FINE/
PHOTO.)
("X" is the corresponding sharpness adjustment
value of the selected mode stored on the FAX
side.)
∗
[CLEAR] key: Returns to "2)" display.
AR-M150/M155/M155X TEST COMMAND, TROUBLE CODES 10 - 23
Details of function/operation
Colors difficult to be copied
Yellow, Green, Water blue
Purple, Red, Yellow
Blue, Water blue, Purple
←
→
/
] key. The code number of the selected mode is dip0slayed on the
Setting No
0
1
2
Display item
Default setting
AE
TEXT
PHOTO
Sharpness adjustment value
4) Enter a one-digit value (0-2) as the sharp-
SHARPNESS SETTING
ZZZZ(0-2)
("Y" is the entered sharpness adjustment value.)
∗
5) Scan start (self print)
SHARPNESS SETTING
6) Print start (self print)
SHARPNESS SETTING
After completion of printing, returns to "4)"
display.
X
Remark
Default
LED
0
COPY mode lamp
0
PRINT mode lamp
0
SCAN mode lamp
ness adjustment value with [10KEY].
Y
[CLEAR] key: Returns to "2)" display.
SCAN
Y
PRINT
Y
Advertisement
