Sharp AR-M155X Service Manual page 77

Main Sub
Contents
code code
22 21 Scanner counter display
(SCAN CNT)
22 SPF JAM counter display (S
JAM CNT) (Disabled when
set to OC) (Executable only
when the SPF is installed.)
24 01 JAM total counter clear (JAM
TTL CLR.)
04 SPF counter clear (SPF
CLR.) (Disabled when set to
OC) (Executable only when
the SPF is installed.)
05 Duplex counter clear (DPLX
CLR.) (Enabled when
Duplex setting is ON)
06 Developer counter clear
(DVLP CLR.)
07 Drum counter clear (DRUM
CLR.)
08 Copy counter clear (COPIES
CLR.)
[Function]
The scanner counter is displayed.
[Operation]
1) Initial display
22-21 SCAN CNT
***,***
[Function]
The SPF JAM counter is displayed.
[Operation]
1) Initial display
22-22 S JAM CNT
***,***
[Function]
When [OK (ENTER)/START] key is pressed, the JAM total counter is cleared to 0 and "000,000" is
displayed on the LCD.
[Operation]
1) Initial display
24-01 JAM TTL CLR.
CLEARED 000,000
[Function]
When [OK (ENTER)/START] key is pressed, the SPF counter value is cleared to 0 and "000,000" is
displayed on the LCD.
[Operation]
1) Initial display
24-04 SPF CLR.
CLEARED 000,000
[Function]
When [OK (ENTER)/START] key is pressed, the duplex counter value is cleared to 0, and "000,000"
is displayed on the LCD.
[Operation]
1) Initial display
24-05 DPLX CLR.
CLEARED 000,000
[Function]
When [OK (ENTER)/START] key is pressed, the developer counter value is cleared to 0, and
"000,000" is displayed on the LCD.
[Operation]
1) Initial display
24-06 DVLP CLR.
CLEARED 000,000
[Function]
When [OK (ENTER)/START] key is pressed, the drum counter value is cleared to 0, and "000,000" is
displayed on the LCD.
[Operation]
1) Initial display
24-07 DRUM CLR.
CLEARED 000,000
[Function]
When [OK (ENTER)/START] key is pressed, the copy counter value is cleared to 0, and "000,000" is
displayed on the LCD.
[Operation]
1) Initial display
24-08 COPIES CLR.
CLEARED 000,000
AR-M150/M155/M155X TEST COMMAND, TROUBLE CODES 10 - 11
Details of function/operation