Sharp AR-M155X Service Manual page 48

7) Remove the plate spring on the right and remove the heater lamp.
2)
Heater lamp
8) Remove the spring and remove the separation pawls (3 pcs.).
2)
1)
9) Remove the E-ring and remove the reverse gate.
3)
1)
1)
3)
2)
AR-M150/M155/M155X DISASSEMBLY AND ASSEMBLY 8 - 8
10) Remove the pressure release levers on the right and the left sides.
1)
11) Remove the pressure roller, the pressure bearing, and the spring.
Note: Apply grease to the sections specified with an asterisk (*).
Grease: "JFE552" UKOG-0235FCZZ
1)
3)
2)
Heat roller disassembly
(Continued from procedure (4).)
5) Remove screws, remove the fusing cover, and open the heat roller
section.
3)
2)
1)
Pressure roller
1)
2)
3)
1)
3)
2)