Advertisement
13) Remove the flat cable and the grounding wire.
14) Remove the four screws, and remove the FAX PWB unit. (When
the AR-FX9 is installed)
15) Disconnect the connectors.
16) Remove the three screws, and remove the MCU PWB.
2)
1)
17) Remove two screws and remove the toner motor.
2)
1)
2)
3)
3)
1)
4)
3)
3)
1)
3)
2)
2)
1)
AR-M150/M155/M155X DISASSEMBLY AND ASSEMBLY 8 - 11
18) Remove the three screws, and remove the DUP motor unit and the
belt.
1)
2)
1)
19) Remove the harness guide.
20) Remove the five screws and the grounding wire, and remove the
main drive unit.
1)
1)
1)
1)
CAUTION:Attach the gears securely
3)
2)
Advertisement
