Advertisement
21) Remove the parts as shown below, and remove the pressure
release solenoid and the paper feed solenoid.
2)
1)
1)
2)
22) Remove each pawl, and remove the paper exit tray.
1)
4)
3)
4)
4)
3)
3)
2)
AR-M150/M155/M155X DISASSEMBLY AND ASSEMBLY 8 - 12
23) Remove two screws and remove the fusing connector.
24) Remove five screws and the connector, and lift the intermediate
frame unit to remove.
3)
3)
1)
25) Remove the four screws, and remove the lower paper guide unit.
[Note for installation]
Fit the lower paper guide hole (a) with the shifter gear hole (b) so
that the black resin (c) of the shifter unit can be checked.
1)
3)
3)
4)
2)
2)
b
c
a
1)
1)
1)
2)
Advertisement
