Parent Unit Power Supply - Motorola MBP35BBU User Manual

1. Loosen the screw in a counterclockwise direction using a small
screwdriver. Remove the battery cover.
2. Insert the wire tab of the rechargeable battery pack into the contact
slot as shown above and fit the battery pack into the compartment.
3. Close the battery compartment and tighten the screw in a clockwise
direction.
4. Press and hold
5. Press and hold
NOTE
When the battery level is low, the power LED will turn green and flash.
Charge the battery pack for at least 15 hours before using on battery
power only.
NOTE
When the unit is powered up with either the power adapter or the
rechargeable battery pack, the LED will light up in green. When the
rechargeable battery is in charging mode, the LED will light up in red.
2.4

Parent unit power supply

1. Connect the small plug of the power adapter to the parent unit and
the other end to the electrical outlet (110V/60Hz).
NOTE
Only use the enclosed power adapter (6V DC / 800mA).
2. Press and hold
light up in green.
3. Press and hold
Getting started
p
to turn ON the parent unit.
p
to turn OFF the parent unit.
p
to turn ON the parent unit. The power LED will
p
to turn OFF the parent unit.
9