Table of Contents
Advertisement
3. Using the Baby Monitor MBP35BL,
MBP35BW
3.1
Setting Up
• Place the camera in a convenient location and point the lens of the
camera towards the area you want to monitor.
• Tilt the head of the baby unit up or down to your desired position until
the parent unit gets a good reception of the baby.
NOTE
Do not place the camera within baby's reach! If there is interference on
the picture or sound, try moving the units to different locations, and
ensure they are not close to other electrical equipment.
3.2
Night Vision
The camera has high-intensity infrared LEDs for picking up clear images
in the dark. When the built-in photo sensor detects a low level of ambient
light, the LEDs will automatically activate and the screen on the parent
unit will display in black and white.
NOTE
If the ambient light near the baby unit is marginal, the screen may appear
to flicker between colour and black and white.
3.3
Talk Function
t
Press and hold
Baby unit loudspeaker. The symbol
the display screen.
3.4
Adjusting the volume of the parent unit
<
1. Press
and
during normal operations and
the display screen.
NOTE
Volume adjustment does not work if the baby monitor selection is in
mode.
Using the Baby Monitor MBP35BL, MBP35BW
on the Parent unit to talk to your baby through the
>
to adjust the volume (5 levels) of the parent unit
Talk
will be displayed in the middle of
(5 volume levels) appears on
AUTO
11
Advertisement
Table of Contents
