Table of Contents
Advertisement
Data Memory Storage
Storing Readings:
1.
With the data to be saved in the display, press the STORE button for 2 seconds until the unit
beeps. The data will be saved to the memory location indicated. The numeric display above
the MEM icon will then advance to the next location.
2.
When the 20 memory locations are full, the unit will overwrite old saved readings starting
with memory location 01.
Recalling Stored Readings:
1.
Simultaneously press and release the ▲and ▼ buttons to display stored readings. The
numeric display above the MEM icon will flash and the data stored in that location will be
displayed.
2.
Press the ▲or ▼button to scroll through the memory locations.
3.
To return to normal operating mode, press the STORE button.
Clearing Stored Data:
1.
To clear stored data, press and hold the ▲and STORE buttons simultaneously until CLR
appears on the display.
Auto Power Off
The meter will enter a sleep mode after 30 minutes of inactivity. The meter will emit a warning
beep 15 seconds before shutting down.
To disable the APO feature, press the MODE button when turning the meter ON. The "APO" icon
will not appear, indicating it is disabled.
TM
Bluetooth
and Android
This meter includes a Bluetooth module designed to communicate with an Android Application
TM
ExView
MO300.
1.
Enable the MO300 Bluetooth by pressing and holding the ▲button for two seconds. The
Bluetooth icon will appear in the display.
2.
Pair the meter to the Android App ExView
3.
Once paired, the data from the MO300 will be continuously displayed and updated on the
Android App ExView
Typical Moisture Measurement and Documentation Procedures
1.
Use the Moisture meter to measure the moisture levels at various suspect locations.
2.
When a spot of interest is located, store the moisture reading in the moisture meter's
memory.
3.
Recall the reading from memory. The moisture meter will now continuously transmit this
reading via Bluetooth.
TM
Communication
TM
MO300.
TM
MO300.
9
EXTECH INSTRUMENTS
MO300-EN v1.3 5/14
Advertisement
Table of Contents
Need help?
Do you have a question about the MO300 and is the answer not in the manual?
Questions and answers