Scheduling Screen - ZyXEL Communications BG-418N v1 User Manual

6.10 Scheduling Screen

Use this screen to set the times your wireless LAN is turned on and off. Wireless LAN scheduling is
disabled by default. The wireless LAN can be scheduled to turn on or off on certain days and at
certain times. To open this screen, click Network > Wireless LAN > Scheduling tab.
Figure 59 Network > Wireless LAN > Scheduling
The following table describes the labels in this screen.
Table 35 Network > Wireless LAN > Scheduling
LABEL
Enable Wireless
LAN Scheduling
Action
Day
Except for the
following times
Apply
Reset
DESCRIPTION
Select this to enable Wireless LAN scheduling.
Select On or Off to specify whether the Wireless LAN is turned on or off. This field works
in conjunction with the Day and Except for the following times fields.
Select Everyday or the specific days to turn the Wireless LAN on or off. If you select
Everyday you can not select any specific days. This field works in conjunction with the
Except for the following times field.
Select a begin time using the first set of hour and minute (min) drop down boxes and
select an end time using the second set of hour and minute (min) drop down boxes. If
you have chosen On earlier for the WLAN Status the Wireless LAN will turn off between
the two times you enter in these fields. If you have chosen Off earlier for the WLAN Status
the Wireless LAN will turn on between the two times you enter in these fields.
Note: Entering the same begin time and end time will mean the whole day.
Click Apply to save your changes back to the NBG-418N.
Click Reset to reload the previous configuration for this screen.
Chapter 6 Wireless LAN
81