Table of Contents
Advertisement
Chapter 4 Modes
Table 18 Menus: Router Mode (continued)
LINK
NAT
DDNS
Security
Firewall
Management
Remote
MGMT
UPnP
Maintenance
System
Logs
Tools
Sys OP
Mode
Language
4.3 Setting your NBG-418N to AP Mode
Connect your computer to the LAN port of the NBG-418N.
1
The default LAN IP address of the NBG-418N is 192.168.1.1 in router mode (192.168.1.2 by default
2
in non-router mode). In router mode, the NBG-418N can assign your computer an IP address, so
you must set your computer to get an IP address automatically (computer factory default) or give it
a fixed IP address in the range between 192.168.1.3 and 192.168.1.254.
After you've set your computer's IP address, open a web browser such as Internet Explorer and
3
type the IP address of the NBG-418N as the web address in your web browser.
Log into the Web Configurator. See the
4
Go to Maintenance > Sys OP Mode > General and select Access Point.
5
44
TAB
FUNCTION
General
Use this screen to enable NAT.
Application
Use this screen to configure servers behind the NBG-418N.
General
Use this screen to configure Dynamic DNS, a service that allows you to
map a fixed domain name to a non-fixed IP address.
General
Use this screen to activate/deactivate the firewall.
Services
Use this screen to enable or disable ICMP and VPN passthrough features.
WWW
Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the NBG-418N.
General
Use this screen to enable UPnP on the NBG-418N.
General
Use this screen to view and change administrative settings such as system
and domain names, password and inactivity timer.
Time Setting
Use this screen to change your NBG-418N's time and date.
View Log
Use this screen to view the logs for the categories that you selected.
Firmware
Use this screen to upload firmware to your NBG-418N.
Configuration
Use this screen to backup and restore the configuration or reset the factory
defaults to your NBG-418N.
Restart
This screen allows you to reboot the NBG-418N without turning the power
off.
General
This screen allows you to select the device operation mode.
Language
This screen allows you to select the language you prefer.
Chapter 2 on page 17
for instructions on how to do this.
Advertisement
Table of Contents
