Scheduling Screen - ZyXEL Communications ARMOR Z1 NBG6816 User Manual

Table 36 Expert > Wireless > WPS (continued)
LABEL
Or input station's
PIN number
WPS Status
Status
Release
Configuration
802.11 Mode
SSID
Security
Apply
Cancel

11.8 Scheduling Screen

Use this screen to set the times your wireless LAN is turned on and off. Wireless LAN scheduling is
disabled by default. The wireless LAN can be scheduled to turn on or off on certain days and at
certain times. To open this screen, click Expert > Wireless > Scheduling.
Chapter 11 Wireless LAN
DESCRIPTION
Use this button when you use the PIN Configuration method to configure wireless
station's wireless settings.
Type the same PIN number generated in the wireless station's utility. Then click Start to
associate to each other and perform the wireless security information synchronization.
This displays Configured when the ARMOR Z1 has connected to a wireless network
using WPS or when WPS Enable is selected and wireless or wireless security settings
have been changed. The current wireless and wireless security settings also appear in
the screen.
This displays Unconfigured if WPS is disabled and there are no wireless or wireless
security changes on the ARMOR Z1 or you click Release Configuration to remove the
configured wireless and wireless security settings.
This button is only available when the WPS status displays Configured.
Click this button to remove all configured wireless and wireless security settings for WPS
connections on the ARMOR Z1.
This is the 802.11 mode used. Only compliant WLAN devices can associate with the
ARMOR Z1.
This is the name of the wireless network (the ARMOR Z1's first SSID).
This is the type of wireless security employed by the network.
Click Apply to save your changes back to the ARMOR Z1.
Click Cancel to reload the previous configuration for this screen.
ARMOR Z1 User's Guide
100