Status Screen (Ap Mode) - ZyXEL Communications BG-418N v1 User Manual

Chapter 4 Modes
Figure 30 Maintenance > Sys OP Mode > AP
A pop-up window appears providing information on this mode. Click OK in the pop-up message
6
window. Click Apply. Your NBG-418N is now in AP Mode.
Note: Wait while the NBG-418N restarts, then log in to the Web Configurator again.

4.3.1 Status Screen (AP Mode)

Click on Status. The screen below shows the status screen in AP Mode.
Figure 31 Status Screen (AP Mode)
45