Table of Contents
Advertisement
3.9
Select camera
You can select the baby unit you want to view, or view all baby units in Scan
Mode.
If you select Scan Mode, the screen switches to display another baby unit
automatically after some time. The switching is made in a loop:
1. Press
when the parent unit is not in use.
-
+
2. Press
or
<
>
3. Press
or
Mode ( ).
4. Press
to confirm your selection.
3.10 Zoom
You can zoom in or out when viewing an image from the baby unit.
>
1. Press
to zoom in.
2. Press and hold
downward, leftward or rightward correspondingly.
<
3. Press
to zoom out.
3.11 Pairing and replacing baby unit(s)
The system comes with baby unit(s) already paired with the parent unit.
You can pair a maximum of four baby units to your parent unit. Each new baby
unit must be paired to the parent unit before use.
To pair and replace a baby unit:
1. Press
when the parent unit is not in use.
-
+
2. Press
or
<
>
3. Press
or
displays
.
NOTE
If you choose an occupied baby unit slot, the new baby unit will replace the
existing baby unit.
4. Power on the new baby unit, and then immediately press and hold
the Power/Link indicator flashes.
Using Your Digital Video Baby Monitor
to scroll to
.
to select the baby unit you want to view (1, 2, 3 or 4) or Scan
+
-
<
>
,
,
or
to move the zoomed image upward,
to scroll to
.
to choose a desired baby unit slot, then press
to
.
. The screen
until
15
Advertisement
Table of Contents
