Download Print this page

Blanco BCC774T Instructions For The Use And Care And Installation page 7

Touch control cooktop

Advertisement

ARRANGEMENT OF THE HEATING ELEMENTS
Model BCC774T
LEFT FRONT
RIGHT REAR
SWITCH ON/OFF A HEATER ZONE
To switch ON a heater Touch any heater´s zone during 400 msec. Long beep will be heard and "0" value
will appear in target zone digit, indicating power level.
● If any cooking stage is in position 0, this display will switch OFF automatically after 10 seconds and
the zone OFF sequence will sound.
● If there is residual heat indication in the display which is ON but in 0 power, "0" will appear changing
over.
● If lock function is active you cannot switch ON a zone.
To switch OFF a heater Touch any heater´s zone during 1, 2 sec. 3 short beeps will be heard and nothing
or "H" value will appear in target zone digit if residual heat exists. Zone will be OFF.
● If any cooking stage is in position 0, this display will switch OFF automatically after 10 seconds and the
zone OFF sequence will sound.
● If there is residual heat indication in the display which is OFF, "H" will be displayed.
● Even lock function is active you can switch OFF a zone.
● If only one heater is active and this one is switched off, 4 short beep will be heard indicating all cook top
is OFF.
INCREASE/DECREASE POWER LEVEL
With a short press on '
3... 9 - P.
P
from 0 level pressing
● Direct Access to
● For long presses in
power stops at level 9, and for a higher power another short press is needed on the
sound is heard with fast increase/decrease.
P
● Once arrived to
power level, pressing
● With a zone ON at 0 power level, if the zone is hot, 0 will blink alternatively. After 10 seconds, 0 will
disappear an 'H' letter will appear fixed on display.
● When a heater is selected and '
but heater will maintain selected during 10 seconds.
DESCRIPTION
LEFT REAR
RIGHT FRONT
+
' or '
' keys, increase or decrease power in the selected zones digit: 0 - 1 - 2 -
+
or
keys, power level increases/decreases continuously. With a fast increase,
+
+
' and '
' keys are touched at the same time, power level will go to '0'
key.
key again does not change power level to 0.
6
+
key. No beep

Advertisement

loading