9.
Check Enable direct connections to the
desktop computer.
Tap Change Connection.
10. Select the type of connection you want to use.
Setting up the Wireless Local Area Network Card
MT380 automatically detects RF cards during the first-time installation. Note that you can use one of
the following two ways to set the IP address:
•
Obtaining an IP Address via DHCP Server
•
Specifying an IP Address
Obtaining an IP Address via DHCP Server
To obtain the IP address via DHCP server, make sure a DHCP server is available in your LAN environ-
ment.
1.
Tap
Settings
Network and Dial-up Connections.
22
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Control Panel