Connecting The Device To Your Computer - Unitech TASHI MT38NOREADER01 User Manual

Connecting the Device to Your Computer

1. Locate the I/O panel on MT380's rear cover,
and remove the I/O panel by twisting a
Philips screwdriver on the cross mark shown
as the illustration.
2. Connect the provided full RS232 converter cable to the terminal's full-duplex RS232 port, and
then connect the other end to PC.
3. Power on MT380.
20
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.