7.
Tap Enroll to input a new sample id for the
fingerprint. For example, 123. Tap OK.
8.
Put finger on the sensor three times
according to the message shown on
screen.
9.
The finger print is enrolled into the pro-
gram and displayed in the Slot-Id field.
10. Select a finger print id and tap Verify to
start verifying the finger print.
A pop-up window appears "Verify live fin-
ger with slot 0 id '123'?". Tap Yes.
12
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.