Unitech TASHI MT38NOREADER01 User Manual page 21

11. Put finger on the sensor according to the
message shown on screen.
A pop-up window appears with verification
results: "Match" or "No match". Tap OK.
12. Tap Identify to find finger print id info.
Put finger on the sensor according to the
message shown on screen.
A pop-up window appears with verification
results: "Match found: slot 0 id '123'" or
"No match". Tap OK.
13. Under the Grab/GrabW tab, tap Grab/
GrabWindow to collect a finger print
image.
14. Under the Info tab, tap Get Module Info
to display the Finger Print module info.
Under the Type drop-down menu, select
all, internal, or external, then tap Get
Available Memory to display the Finger
Print Reader's memory.
Chapter 2 Using the Hardware
13