Minimum Information Required for Technical Assistance ..........15 Return Merchandise Authorization - RMA ..............15 Specifications ....................16 Product specifications ....................16 Connections ........................ 16 Temperature range ..................... 16 Mechanical specifications ................... 16 Approvals and certificates ................17 Danalock DANALOCKV2-BTZU-X, Technical Manual v.1.2, December 2015 Page 2...
Page 3
All other trademarks are the property of their you leave. respective owners. Product installation disclaim: Depending on how your deadbolt Release Notice is installed, to unlock your Danalock you will turn it the This document is release 1.X of the DANALOCKV2-BTZU-X, opposite direction that deadbolt turned.
Page 4
Product as an integral part thereof. Such embedded software/firmware (which includes all updates FCC/IC The DANALOCKV2-BTZU-X product comply with the FCC thereto) contains valuable trade secrets and is proprietary to Part 15.247 and part 15.249 and the Industry Canada Poly-Control ApS and its suppliers.
Avoid Body Contact with Device during Operation Do not operate the DANALOCKV2-BTZU-X in direct contact with your body. Maintain at least 8 inches (20 cm) separation between the device and any parts of your body.
The type of door i.e. mass and closing force, durability for dead bolt or latch bolt operations and security for physical attacks are not applicable to DANALOCKV2-BTZU-X. The DANALOCKV2-BTZU-X lock is not in any case related to the door or striking plate already existing on the door where DANALOCKV2-BTZU-X is mounted. It is however recommended to verify the operation of the DANALOCKV2-BTZU-X after mounting the product.
The DANALOCKV2-BTZU-X unit is a low power radio transmitter and receiver. Periodically the DANALOCKV2-BTZU-X wakes up either due to activity or by a timer. When it is ON, it receives and sends out radio frequency (RF) signals for a short period of time.
Page 8
BANDS OR FCC/IEEE/ICNIRP REQUIREMENTS FOR BLUETOOTH LE and Z-WAVE BANDS. The DANALOCKV2-BTZU-X unit is not intended for handheld use or to be worn on the body. A minimum separation of eight (8”) inches (20 cm) is to be maintained between the DANALOCKV2-BTZU-X and any persons’...
This privacy policy governs your use of the software application ”danalock App” for mobile devices that is created by Poly-Control ApS. The Application controls the use of the electronic door locking device Danalock, and only works with iPhone 4s / Android 4,4 or newer smartphones with Bluetooth Smart or Z-wave Technology.
States. Contact us If you have any questions regarding privacy while using the Application, or have questions about our practices, please contact us via email at mail@danalock.com Delivered standard content The delivered standard package content includes the following items: 1 x Danalock (incl. 4 x 3,0V single cell batteries)
DANALOCKV2-BTZU-X Installing the unit Practical installation advice • Please follow the installation guide carefully. It is available on the danalock site that is found at https://guide.danalock.com/: • Be aware that multiple installation guides exist. The installation guides are targeted for the specific models.
DANALOCKV2-BTZU-X Functionality check LED signals The DANALOCKV2-BTZU-X is fitted with a is fitted with a circle of LEDs that has the following status that has the following status indications: Status LED mode LED color Status indication Constant red light Lock is being latched...
Bluetooth devices. Electro mechanical lock classification The DANALOCKV2-BTZU-X is categorized as an electro mechanical lock for operation on the inside of a door instead of a pure mechanical wrings. The locks incorporates an electromechanically operated motor for opening and closing the door based on either a finger press (from the inside) or a secure locking/unlocking command transmitted over a radio communication interface.
DANALOCKV2-BTZU-X Product family The DANALOCKV2-BTZU-X series covers the following models that are classified within the respective region depending on the frequencies that are used for the models. Z-Wave Model Bluetooth Apple Home Kit DANALOCKV2-BT DANALOCKV2-BTZU DANALOCKV2-BTZE DANALOCKV2-BTZH DANALOCKV2-BT-K DANALOCKV2-BTZU-K DANALOCKV2-BTZE-K...
Minimum Information Required for Technical Assistance If you or a user reports difficulty with a DANALOCKV2-BTZU-X unit, it is helpful to retrieve directly from the unit all current configuration settings and the message log data etc., that is accessible by the technical support when they receive the following information about the unit.
DANALOCKV2-BTZU-X Specifications Product specifications The DANALOCKV2-BTZU-X unit is with integrated antennas and battery Connections Operational voltage (supply voltage): 4 x 3V DC (12V DC) Standby time on the battery 350 days for DANALOCKV2-BTZU-x models Temperature range In active running mode -20ºC to +40ºC...
RSS-247 of Industry Canada requirements. Notice statements according to CFR 47 Part 15.19 / RSS-GEN: The DANALOCKV2-BTZU-X product complies with Part 15 of the FCC rules and with Industry Canada license exempt standard(s). Operation is subject to the following two...
Page 18
Cet émetteur ne doit pas être installé ou utilisé en conjonction avec d'autres antennes ou d'autres émetteurs. EEC/ International • The DANALOCKV2-BTZU-X complies with the essential requirements of the 2011/65/EC directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.