Troubleshooting - Philips SWW1800/12 User Manual

8 Troubleshooting

There is no video displayed on my TV screen.
Verify the POWER LED and SOURCE LED
indicator on the transmitter:
Flashing blue power LED
• Ensure the transmission range between
receiver and transmitter is not over 20m
or 66ft transmission distance (with no
obstruction between the transmitter and
receiver). Move the transmitter closer to
the receiver.
Tip
•
For more information, check the section on
"Position the transmitter and receiver".
• CHANNEL on the remote control
Press
to change wireless channel manually.
Tip
•
For more information, check the section on
"How to avoid interference".
Solid blue power LED + slow and flashing
source LED
•
Ensure the audio format and video
resolution of your A/V equipments
are supported and conformed to the
technical specification.
Tip
•
For more information, check the section on
"Technical data".
• Connect the source device to your TV
to check and modify the video format
compatibility.
Solid blue power LED + quick and flashing
source LED
•
Ensure the proper cables are connected
between the transmitter and your
devices.
•
Ensure your HD devices connected with
the transmitter are powered on.
•
Ensure the HDMI cable is connected
between the HDTV and receiver.
•
Ensure the audio/video source and
transmitter are connected with the same
color cables.
• Check if you have set your HDTV to
the HDMI video mode. Reposition the
transmitter until the optimal picture and
sound quality are achieved.
•
Press the source buttons: 1 HDMI, 2
HDMI, YPbPr, 4 YPbPr on the remote
control until you see the available video
from your device.
IF there is intermittent video problem or the
picture quality is poor, what do I do?
• Ensure that the video resolution of
your HD device can support 1080p @
24/25/30 Hz, 1080i, 720p, 576p, 576i,
480p, 480i.
Note
•
Ensure your HDTV and HD device can
support the same video resolution as
SWW1800
•
Whether or not your HD device is able to
achieve the 1080p resolution depends on its
standard behavior.
•
Even if your HD device can only achieve
1080i instead of 1080p, the resulting 1080i
resolution has also a very good image quality.
Tip
•
For more information, check the section on
"Technical data".
• If your current video source is
INPUT, press 3 INPUT/4 INPUT
repeatedly on the remote control to
finetune the picture performance.
• CHANNEL on the remote control
Press
to change the wireless channel manually.
Tip
•
For more information, check the section on
"Change to a different wireless channel".
3 INPUT/4
EN
19