Table of Contents
Advertisement
To enter the listen mode, press
remote control of your HDTV/projector to
switch it off.
The HDTV/projector and the HD
»
device are in standby mode.
The LED indicators of the transmitter
»
and receiver become solid purple.
Note
•
The power consumption in the listen mode
is higher than the power consumption in the
sleep mode.
If you need to switch your transmitter from
listen mode to sleep mode for power saving,
•
Press and hold
of the transmitter .
The HDTV/projector enters the sleep
»
mode.
The LED indicators of the transmitter
»
and receiver become solid red.
If your HDTV and HD device are not CEC
compliant:
1
press
on the remote control of the
transmitter.
»
The LED indicators of the transmitter
and receiver become solid red.
Use one-touch play in listen mode
One-touch play function enables you to press
only one button to activate your HDTV/
projector and your HD devices in standby
mode.
•
Ensure the HDTV and HD device are in
standby mode.
•
Ensure the transmitter is in listen mode.
•
Press
on the remote control of your
HD device to switch it on.
The LED indicators of the transmitter
»
and receiver flash and then become
solid blue.
The HDTV is on and the HD device is
»
activated automatically.
EN
14
on the
on the remote control
Note
•
After you press
before you see the LED indicator become solid
blue and that the HDTV and HD device are
activated.
Tip
•
To switch on the HDTV, you can also press
the HDMI source button of your HDTV
remote control (if available). Then select the
HD device on the screen and press
more information, see the user manual of your
HDTV.
Note
•
One-touch play feature does not apply in sleep
mode.
LED indicator status in standby mode
Mode
Standby (Listen
mode)
Standby (Sleep mode) Solid red
On mode
, it takes around 15 seconds
. For
Status of the transmitter
and receiver
Solid purple
Solid blue
Advertisement
Table of Contents
