What’s in the box Receiver Transmitter User manual Quick Installation Guide Power adapter x 1 USB cable for the power supply Quick Start Guide of the transmitter x 1 HDMI cable Adhesive tape x 2 Anchors x 2 Screws x 2 Note Make sure you have all these items in the box.
Install Connect the transmitter to your computer Connect the transmitter to the HDMI port of the computer. Connect the small end of the USB cable to the POWER jack of the transmitter; Connect the other end of the USB cable to your the USB port of your computer.
Enjoy Turn on the power of your HDTV Go to the source menu under the settings menu of your HDTV. Select the HDMI input to which the receiver is connected. Activate the wireless link Switch on the transmitter and receiver. When there is power supply for the transmitter and receiver, they are on automatically.
Mount your receiver on the back of the HDTV Remove the white protective film from one of the supplied adhesive tapes. Secure the glued side of the adhesive tape and attach it to the central bottom area of the receiver. Select a flat location on the rear side of the HDTV.