User Instructions - Belling GHU573 Installation And User Instructions Manual

1. To light the hotplate push in the appropriate control knob and turn anti-clockwise to the large flame
symbol (fig. 9).
2. Keep the knob depressed until the burner lights.
3. Turn the tap to the required setting.
NOTE: Matches can be used to light the burners in the event of a power failure.
NOTE FOR GHU573T AND GHU70TGE MODELS ONLY
Keep the control knob pressed in for 15 seconds ensuring the burner stays lit when released. If the burner
fails to stay lit wait for 1 minute before relighting.
SELECT THE RIGHT BURNER
Use an appropriately sized pan and with flat bottom for each burner (see the table below and fig. 10).
When the contents of the pan start to boil, turn the knob down to reduced rate position.
Always put a lid on the pan.
Rapid right
Burners
Ø pans in cm

6. USER INSTRUCTIONS

FIG. 9
Semirapid
right front
front
1400 W
2800 W
20 - 22 16 - 18
Semirapid
left rear
1750 W
16 - 18
10
FIG. 10
Auxiliary Ultra rapid
left front centre
1000 W 3100 W
10 - 14 24 - 26