Physical Layout Z-2400-A2 Series; Front Panel Connections And Leds; Terminal Connections - Intech Instruments Z-2400-A2 Series Installation Manual

Physical Layout Z-2400-A2 Series.

Front
102mm
120mm
24mm

Front Panel Connections and LEDs.

Mounting: 35mm DIN rail.
LED indicators: PWR - Power status.
STACK - Mesh network stack activity.
NTWRK STATUS - See Diagnostic LEDs Tables for more information.
HIGH / LOW - High to Low Link Quality to next wireless Z-2400-A2 Node.
Aerial: Screw in to attach. (
PROG: USB input to program analogue inputs and digital inputs/outputs via XU-USB Programming Kit.
(Software: uP Configure version 1.2.8.0 or later.)
RESTART: Button to reboot the Z-2400-A2 node.

Terminal Connections.

Z-2400-A2O
Z-2400-A2O & Z-2400-A2I
R1 & R2
Relay Ouputs.
Side - Standing
111mm
(Including Terminal Connectors.)
Additional High Gain Antennas Available.
CH1 & CH2 Analogue
Output Connections.
Power Supply
9~36Vdc.
Digital Inputs 1~4 and
Digital Outputs 3 & 4.
Side - DIN Rail Mount
With Standard Antenna Fitted
225mm
Side - DIN Rail Mount
With Coax Fitted
)
Z-2400-A2I
Dip Switches for
MicroScan Use Only.
6
147mm
225mm
CH1 & CH2 Analogue
Input Connections.
Power Supply
9~36Vdc.
151mm