Specifications; Analogue Input 1~2 Specifications - Intech Instruments Z-2400-A2 Series Installation Manual

Specifications.

Analogue Input 1~2 Specifications.

Input Resolution
Input Isolation
Sensor Break
Voltage Input Specifications:
Input Impedance
mV Maximum Over-range
V Maximum Over-range
mV Range
V Range
Accuracy
Linearity and Repeatability
Channel Separation
Ambient Drift
Noise Immunity (CMRR)
RF Immunity
Current Input Specifications:
Minimum Recommended Span
Input Impedance
Maximum Over-range
mA Range
Accuracy
Linearity and Repeatability
Channel Separation
Ambient Drift
Noise Immunity (CMRR)
RF Immunity
Thermocouple (T/C) Input Specifications:
Thermocouple Types
Input Impedance
T/C Lead Resistance
Cold Junction Compensation.
CJC Drift
Accuracy
Sensor Fail
Type B Range
Type E Range
Type J Range
Type K Range
Type N Range
Type R Range
Type S Range
Type T Range
RTD Input Specifications:
Pt100 RTD Type
Pt1000 RTD Type
Sensor Current
Lead Wire Resistance
Sensor Fail
Ambient Drift
Accuracy
Resolution
Pulses & Frequency:
Input Type
Frequency Range
Frequency Resolution
Fast Counter Range
Maximum Amplitude
Debounce
16 Bits, 50,000 Steps Average (some ranges may differ).
2500Vac for 1 minute between Inputs.
RTDs & Thermocouples: Upscale. Broken Link or Other Input Types: Downscale.
>500KΩ on all ranges.
3Vdc Continuous.
24Vdc Continuous.
-200~200mV, -200~1000mV.
0~10V, 0~18V.
0.1% FSO Max.
0.05% FSO Max.
0.001% Max.
0.003%/°C FSO Typical.
160dB Tested @ 300Vrms 50Hz.
1% effect FSO Typical.
0~1mA (gives 1000 steps on output).
45Ω.
Protected by PTC Up to 24Vdc Max.
0~20mA (4~20mA).
0.1% FSO Max.
0.1% FSO Max.
0.001% Max.
0.003%/°C FSO Typical.
160dB Tested @ 300Vrms 50Hz.
1% effect FSO Typical.
B, E, J, K, N, R, S, T.
>500KΩ.
100Ω Max.
-10~60°C.
0.02°C/°C For Installation Upright.
0.1% of FSO ±1°C Typical.
Upscale or Downscale Selectable (Upscale Default).
0~1800°C (32~3272°F).
-200~700°C (-328~1292°F).
-200~1000°C (-328~1832°F).
-200~1260°C (-328~2300°F).
-200~1300°C (-328~2372°F).
0~1700°C (32~3092°F).
0~1700°C (32~3092°F).
-200~400°C (-328~752°F).
3 Wire Pt100 RTD DIN 43760:1980 Standard Input.
3 Wire Pt1000 RTD Standard Input.
0.6mA Continuous.
Pt100: 10Ω/wire Max.
Pt1000: 5Ω/wire Max.
0.1% FSO Offset Error per Ω of Lead Resistance.
Upscale or Downscale Selectable (Upscale Default).
0.003°C/°C Typical.
0~300°C ±0.1°C.
0~850°C ±0.3°C.
0.01°C for -200~250°C, (-140~210°F).
0.1°C for -200~850°C (-320~1560°F).
Meter Pulses, Frequency, or On/Off State Inputs.
Open Collector - NPN, PNP.
0~2500Hz.
0.1Hz.
0~2500Hz.
0~5Vdc.
0~50Hz Max.
4