Kenwood DRV-430 Instruction Manual page 20

Various Settings
MENU
Playback
Continuous recordings
Manual recordings
Event recordings
Parking recordings
Still images
Parking recording settings
Recording time
Overwrite
Sensitivity settings
Video recording settings
Audio recording
Continuous recording file
length
Manual recording time
Event recording time
Overwrite (manual)
Overwrite (event)
Resolution
HDR recording
Sensitivity settings
20
Select the desired folder from the list screen and play a file. ( Á P.17)
Files can also be protected or deleted during playback. ( Á P.18)
OFF/10 sec*/20 sec/30 sec
Set the recording time for parking recording after collision detection.
ON*/OFF
Set whether or not to overwrite old files when the maximum number of
recording files will be exceeded.
1(Low)/2/3(Mid)*/4/5(High)
Set the sensitivity for detecting a vehicle collision while parked.
1: Detects large collisions, 3: Standard, 5: Detects small collisions
ON*/OFF
Set whether or not to record audio with the microphone during recording.
1 min*/2 min/3 min
Set the recording time for continuous recording. The recording is divided each
time the recording time elapses.
15 sec*/30 sec/1 min
Set the recording time for manual recording. The recording time for before
manual recording is set to 10 seconds.
15 sec*/30 sec/1 min
Set the recording time for after collision detection. The recording time for
before vehicle collision detection is set to 10 seconds.
ON/OFF*
Set whether or not to overwrite old files when the maximum number of
recording files will be exceeded.
ON/OFF*
Set whether or not to overwrite old files when the maximum number of
recording files will be exceeded.
3M (2304x1296)/1920x1080*/1280x720
Set the resolution for recording.
ON*/OFF
Setting this to ON records subjects by reducing overexposure and loss of dark detail even when
capturing scenes with high light-dark contrast. HDR cannot be set to ON when the resolution is 3M.
1(Low)/2/3(Mid)*/4/5(High)
Set the sensitivity for detecting a vehicle collision.
1: Detects large collisions, 3: Standard, 5: Detects small collisions
* Factory default settings