Table of Contents
Advertisement
SC-2061 Board
Physical
Board dimensions (including standoffs)
I/O connectors
Operating Environment
Temperature
Relative humidity
Storage Environment
Temperature
Relative humidity
Mounting and Connection to Data Acquisition Boards
The SC-2061 has metal standoffs so the board can sit on a workbench near the host computer. You
can use an optional rack-mount chassis, which can be fitted with a flat acrylic plastic cover. The
SC-2061 grounds to its metal standoffs, and thus to the rack, when it is mounted in the chassis.
Warning:
The SC-2061 must be completely enclosed if any onboard voltages or voltage
differences across the optoisolators can exceed 30 V.
The SC-2061 connects to the data acquisition boards listed in Table 3-1 via the appropriate
SC-205X Series cable adapter board.
Table 3-1. Data Acquisition Boards for Use with the SC-2061 Board
Host Data
AT-MIO-16
Acquisition
AT-MIO-16D
Boards
AT-MIO-16F-5
AT-MIO-16X
AT-MIO-64F-5
MC-MIO-16
NB-MIO-16
NB-MIO-16X
A 26-pin ribbon cable connector connects the SC-2061 board to a digital I/O connector on an
SC-205X Series cable adapter board. The SC-205X Series board connects to the data acquisition
board with a 50-conductor or 100- conductor ribbon cable. You can connect the SC-2061 to any
digital I/O port on any SC-205X Series board. The digital I/O port that is connected to the
SC-2061 must be configured and operated on the data acquisition board as output only. For more
information on mounting and connection, see Chapter 5, Installation and Operation.
SC-206X Series User Manual
SC-2050
SC-2051
AT-MIO-16D
MC-DIO-24
NB-DIO-24
PC-DIO-24
5.2 by 4.9 by 1.8 in.
One 26-pin male ribbon-cable connector
26 screw terminals
0° to 70° C
5% to 90% noncondensing
-55° to 125° C
5% to 90% noncondensing
SC-205X SeriesBoards
SC-2052
AT-DIO-32F
MC-DIO-32F
NB-DIO-32F
3-4
© National Instruments Corporation
Chapter 3
SC-2053
SC-2054
Lab-LC
PC-DIO-96
Lab-NB
Lab-PC+
Advertisement
Table of Contents
