Table 2-1. Data Acquisition Boards For Use With The Sc-2060 Board - National Instruments SC-2061 User Manual

Chapter 2

Table 2-1. Data Acquisition Boards for Use with the SC-2060 Board

Host Data AT-MIO-16
AT-MIO-16D
Acquisition
Boards AT-MIO-16F-5
AT-MIO-16X
AT-MIO-64F-5
MC-MIO-16
NB-MIO-16
NB-MIO-16X
A 26-pin ribbon cable connector connects the SC-2060 board to a digital I/O connector on an
SC-205X Series cable adapter board. The SC-205X Series board connects to the data acquisition
board with a 50-conductor or 100-conductor ribbon cable. You can connect the SC-2060 to any digital
I/O port on any SC-205X Series board. The digital I/O port that is connected to the
SC-2060 must be configured and operated on the data acquisition board as input only. For more
information on mounting and connection, see Chapter 5, Installation and Operation.
© National Instruments Corporation
SC-2050 SC-2051
AT-MIO-16D
MC-DIO-24
NB-DIO-24
PC-DIO-24
SC-205X Series Boards
SC-2052
AT-DIO-32F
MC-DIO-32F
NB-DIO-32F
2-5
SC-2060 Board
SC-2053 SC-2054
Lab-LC PC-DIO-96
Lab-NB
Lab-PC+
SC-206X Series User Manual