Table of Contents
Advertisement
Chapter 4
The SC-2062 connects to the data acquisition boards listed in Table 4-1 via the appropriate
SC-205X Series cable adapter board.
Table 4-1. Data Acquisition Boards for Use with the SC-2062 Board
SC-2050
Host Data
AT-MIO-16
Acquisition
AT-MIO-16D
Boards
AT-MIO-16F-5
AT-MIO-16X
AT-MIO-64F-5
MC-MIO-16
NB-MIO-16
NB-MIO-16X
A 26-pin ribbon cable connector connects the SC-2062 board to a digital I/O connector on an
SC-205X Series cable adapter board. The SC-205X Series board connects to the data acquisition
board with a 50-conductor or 100-conductor ribbon cable. You can connect the SC-2062 to any
digital I/O port on any SC-205X Series board. The digital I/O port that is connected to the
SC-2062 must be configured and operated on the data acquisition board as output only. For
more information on mounting and connection, see Chapter 5, Installation and Operation.
© National Instruments Corporation
SC-205X SeriesBoards
SC-2051
SC-2052
AT-MIO-16D
AT-DIO-32F
MC-DIO-24
MC-DIO-32F
NB-DIO-24
NB-DIO-32F
PC-DIO-24
4-5
SC-2062 Board
SC-2053
SC-2054
Lab-LC
PC-DIO-96
Lab-NB
Lab-PC+
SC-206X Series User Manual
Advertisement
Table of Contents
