[Control Device Password Change] - Panasonic PT-DZ780 Operating Instructions Manual

4) Press the <ENTER> button.
5) Press as to select [CONTROL PANEL] or [REMOTE CONTROL].
6) Press qw to switch [USER].
7) Press as to select the button item to set.
f When [INPUT SELECT BUTTON] is selected, press the <ENTER> button, and then press as to select
the button to set.
[POWER BUTTON]
[INPUT SELECT BUTTON]
[MENU BUTTON]
[LENS BUTTON]
[AUTO SETUP BUTTON]
[SHUTTER BUTTON]
[ON SCREEN BUTTON]
[OTHER BUTTON]
*1 SDI input is supported only for PT-DZ780.
8) Press qw to switch the item.
[ENABLE]
[DISABLE]
f The following items are available only when [RGB1/2 BUTTON] of [INPUT SELECT BUTTON] is selected.
[TOGGLE]
[RGB1]
[RGB2]
[DISABLE]
f The following items are available only when [VIDEO BUTTON] of [INPUT SELECT BUTTON] is selected.
[DISABLE]
[VIDEO]
[Y/C]
[TOGGLE]
f When [INPUT SELECT BUTTON] is selected in Step 7), after the item is switched, press the <MENU>
button to return to the [CONTROL PANEL] screen or the [REMOTE CONTROL] screen.
9) Press as to select [APPLY], and press the <ENTER> button.
f The confirmation screen is displayed.
10) Press qw to select [OK], and press the <ENTER> button.
Note
f When a button operation is performed on the device set to [DISABLE], the [CONTROL DEVICE PASSWORD] screen is displayed.
Enter the control device password.
f The [CONTROL DEVICE PASSWORD] screen will disappear when there is no operation for approx. 10 seconds.
f If the operations of both [CONTROL PANEL] and [REMOTE CONTROL] are set to [DISABLE], the projector cannot be turned off (cannot
enter standby).
f When the setting has completed, the menu screen will disappear. To operate continuously, press the <MENU> button to display the main
menu.
f Even when button operation on the remote control is disabled, operation of the <ID SET> button on the remote control is enabled.

[CONTROL DEVICE PASSWORD CHANGE]

The control device password can be changed.
1) Press as to select [CONTROL DEVICE PASSWORD CHANGE].
136 - ENGLISH
Chapter 4 Settings — [SECURITY] menu
[CONTROL PANEL]
Power standby <v> button, power on <b> button
<RGB1> button, <RGB2> button, <DVI-D>
button, <HDMI> button, <DIGITAL LINK> button,
<SDI> button
*1
<MENU> button
<LENS> button
<AUTO SETUP> button
<SHUTTER> button
—
asqw, <ENTER> button
Enables button operations.
Disables button operations.
Switches between [RGB1] and [RGB2] when the button is operated.
Fixes to [RGB1].
Fixes to [RGB2].
Disables button operations.
Disables button operations.
Fixes to [VIDEO].
Fixes to [Y/C].
Switches between [VIDEO] and [Y/C] when the button is operated.
Buttons that can be set
[REMOTE CONTROL]
<VIDEO> button, <RGB1/2> button, <DVI-D>
button, <HDMI> button, <DIGITAL LINK> button,
<SDI> button
*1
Lens (<FOCUS>, <ZOOM>, <SHIFT>) button
<ON SCREEN> button
Buttons not listed above