Control Commands Via Lan - Panasonic PT-DZ780 Operating Instructions Manual

Control details
GEOMETRY
FREEZE
COLOR
TINT
RASTER PATTERN
ENABLE / DISABLE
Note
f If the projector is operated with the remote control or on the control panel, or by the control command while controlling the projector using
the Art-Net function, the setting of the DMX controller or computer application may be different from the projector status. To reflect the
controls of all channels to the projector, set "ENABLE / DISABLE" of channel 11 to "Disable" and then set back to "Enable".
f To create/register the USER LOGO image, use "Logo Transfer Software" included in the supplied CD-ROM.

Control commands via LAN

When web control administrator rights password is set (Protect mode)
Connecting
1) Obtain the IP address and port number (Initial set value = 1024) of the projector and request a
connection to the projector.
f You can obtain both the IP address and the port number from the menu screen of the projector.
IP address
Port number
2) Check the response from the projector.
Chapter 6 Appendix — Technical information
Performance
OFF
KEYSTONE
CURVED
PC-1 (Only for PT-DZ780)
PC-2 (Only for PT-DZ780)
PC-3 (Only for PT-DZ780)
CORNER CORRECTION
No operation
No operation
OFF
No operation
ON
No operation
No operation
Factory default setting
-31
...
0
...
+31
No operation
No operation
OFF
WHITE
YELLOW
CYAN
GREEN
MAGENTA
RED
BLUE
BLACK
USER LOGO
No operation
Disable
Enable
Obtain from the [NETWORK] menu → [NETWORK STATUS]
Obtain from the [NETWORK] menu → [NETWORK CONTROL] → [COMMAND PORT]
Parameter Default value
0-15
16-31
32-47
48-63
255
64-79
80-95
96-111
112-255
0-31
32-95
96-159 128
160-223
224-255
0-31
32-63
64-65
...
0
128-129
...
190-191
192-255
0-15
16-31
32-47
48-63
64-79
80-95
0
96-111
112-127
128-143
144-159
160-175
176-255
0-127
0
128-255
Remark
To use PC-1, PC-2, and PC-3, the
optional Upgrade Kit (Model No.:
ET-UK20) is required.
―
―
―
When "Disable" is set, operations
of all channels become
unacceptable.
ENGLISH - 177