Table of Contents
Advertisement
2
Remove the fuser unit from the machine.
For details, see "Replacing the Fuser Unit".
Possible to get burned.
Since the fuser unit gets hot, carry out the operation carefully, and when lifting it up you
must hold it by the handle. Do not try to hold it whilst it is hot. Wait until it has cooled
down and then carry out the operation.
3
Attach the envelope lever to the fuser unit.
Press the jam release lever, and then insert the envelope lever in to the nearby hole.
Push the lever to lock.
4
Replace the fuser unit to the machine.
For details, see "Replacing the Fuser Unit".
Loading Envelopes
When printing on envelopes, change the paper size setting, and use the MP tray and rear
output tray.
1
Load envelopes until their edges touch the paper feed entrance with the print
side up.
Com-9, Com-10, DL, C5, Monarch
2
Open the rear output tray.
3
Press the
button on the operator panel repeatedly to select [Setting] and
press the
(ENTER) button.
4
Press the
button to select [Paper Setup] and press the
5
Press the
button to select [MP Tray] and press the
6
Check that [Paper size] is selected, and then press the
7
Press the
or
button to select the envelope size and press the
(ENTER) button.
8
Press the
(ONLINE) button to return to the standby screen.
Available envelope types.
Loading Paper (User's Manual)
For Windows PCL Printer Driver
1
Open the file to print.
2
Select [Print] from the [File] menu.
3
Click [Preferences].
- 16 -
2. Print
(ENTER) button.
(ENTER) button.
(ENTER) button.
Advertisement
Table of Contents
