Ipv6 Firewall - Samsung ET-WV525 User Manual

On this page the user can configure the IPv6 firewall settings. The firewall settings section is an advance feature that is used
to allow or deny traffic from passing through the device. It works in the same way as IP Filters with additional settings. You
can create more detailed rules for the device.
In the IPv6 Firewall rules section the user can create, enable and disable IPv6 firewall rules used by this device.
The following parameters can be configured:
Configure IPv6 Filtering:
Checkbox:
Name:
Source Interface:
Destination Interface:
Schedule:
IP Address Range:
Protocol:
Port Range:
Click on the Save Settings button to accept the changes made.
Click on the Don't Save Settings button to discard the changes made.
S W R
AMSUNG IRELESS OUTER
IP
This option defines the behaviour of all the IPv6 firewall rules created. Option to choose
from are 'Turn IPv6 Filtering OFF', 'Turn IPv6 Filtering ON and ALLOW rules
listed', and 'Turn IPv6 Filtering ON and DENY rules listed'. Select the appropriate
option used here.
Tick this option to used the firewall rules created.
Enter a custom firewall rule name here. This name is used for identification.
Select the appropriate source interface used here.
Select the appropriate destination interface used here.
Select a time schedule that will be applied to this rules here.
Enter the IPv6 address range used here.
Select the protocol used for this rule here. Options to choose from are ALL, TCP, UDP,
and ICMP.
Enter the port range used for this rule here.
U M
SER ANUAL
6 F
V IREWALL
P 72
AGE