Hide thumbs Also See for ET-WV525:
Table of Contents

Advertisement

 
 
 
The Routing option is an advanced method of customizing specific routes of data through your network.
 
 
In the Static Routing section, the user can configure routing rules used by this router. The maximum amount of rules that
can be configured is 32.
 
 
The following parameters can be configured:
 
Checkbox:
Interface:
Destination:
Subnet Mask:
Gateway:
 
Click on the Save Settings button to accept the changes made.
Click on the Don't Save Settings button to discard the changes made.
 
S
W
R
AMSUNG
IRELESS
OUTER
To enable a route, check the box that is on the left side of the route.
Use the drop-down menu to specify if the IP packet must use the WAN or LAN interface to
transit out of the Router.
Enter the IP address of the packets that will take this route.
Enter the subnet mask to specify the subnet of the IP packets that will take this route.
Enter the next hop that will be taken if this route is used.
U
M
SER
ANUAL
R
OUTING
P
50
AGE

Advertisement

Table of Contents
loading

Table of Contents