Samsung ET-WV525 User Manual page 21

Internet Connection Type: PPPoE (Username / Password)
Select PPPoE (Username/Password) from the drop-down menu if your ISP uses a PPPoE connection. Your ISP will provide
you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software
from your computer. The software is no longer needed and will not work through a router.
The following parameters can be configured:
Address Mode:
IP Address:
Username:
Password:
Verify Password:
Service Name:
Reconnect Mode:
Maximum Idle Time:
DNS Mode:
Primary DNS Server:
S W R
AMSUNG IRELESS OUTER
Here the user can specify whether this Internet connection requires the use of a Dynamic
or Static IP address. PPPoE usually requires a Dynamic IP configuration.
Enter the PPPoE IP address used here. This option is only available if Static IP is selected.
Enter the PPPoE account user name used here. This information is given by the ISP.
Enter the PPPoE account password used here. This information is given by the ISP.
Re-enter the PPPoE account password used here.
This optional field enables the user to enter a service name to identify this Internet con-
nection here.
Use the radio buttons to specify the reconnect mode. The user can specify a custom
schedule or specify the On Demand, or Manual option. To specify a custom sched-
ule, use the drop-down menu to select one of the schedules that has been defined in the
Schedules page. To create a new schedule, click the New Schedule button to open the
Schedules page. Schedules will be discussed later.
Enter a maximum idle time during which the Internet connection is maintained during
inactivity. To disable this feature, enable Auto-reconnect.
This option allow the router to obtain the DNS IP addresses from the ISP, when Receive
DNS from ISP is selected, or allows the user to enter DNS IP address manually, when
Enter DNS Manually is selected.
Enter the Primary DNS IP address used here.
U M
SER ANUAL
P 21
AGE