Samsung ET-WV525 User Manual page 19

Internet Connection Type: Static IP
Select Static IP from the drop-down menu if all the Internet port's IP information is provided to you by your ISP. You will need
to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address
entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not
accept the IP address if it is not in this format.
The following parameters can be configured:
IP Address:
Subnet Mask:
Gateway Address:
Primary DNS Address:
Secondary DNS Address:
MTU:
MAC Address:
Click on the Save Settings button to accept the changes made.
Click on the Don't Save Settings button to discard the changes made.
S W R
AMSUNG IRELESS OUTER
Enter the Static IP address provided by the ISP here.
Enter the Subnet Mask provided by the ISP here.
Enter the Gateway IP address provided by the ISP here.
Enter the Primary DNS IP address used here.
Enter the Secondary DNS IP address used here. This field is normally optional. Only one
DNS address is required for a functional Internet connection, but using a second DNS
address provides more stability.
Maximum Transmission Unit - you may need to change the MTU for optimal performance
with your specific ISP. 1500 is the default MTU.
The default MAC Address is set to the Internet port's physical interface MAC address on
the Broadband Router. It is not recommended that you change the default MAC address
unless required by your ISP. You can use the Clone Your PC's MAC Address button to
replace the Internet port's MAC address with the MAC address of your Ethernet card.
U M
SER ANUAL
P 19
AGE