6.
Reset to Default
If you want to reset XCubeNAS to factory default, there are several options to choose from.
Please follow the steps below:
Reset to default by using the reset button on the back of XCubeNAS:
1. Reset network settings: Press and hold the reset button on the rear panel for 3 seconds,
a short beep sound for 1 second will be heard. The administrator password and all the
network settings will be reset, the system configuration will result in:
Reset Admin password to the default value: 1234.
▪
All networking set to "DHCP".
▪
All data service ports set to default setting (All data service enable and set to
▪
default port).
VLAN will be terminated.
▪
Vswitch will be deleted.
▪
Port trunking will be disabling.
▪
After configs are deleted, restart the XCubeNAS.
▪
Log out QSAN Cloud.
▪
DNS settings.
▪
DDNS and UPNP settings.
▪
26
© Copyright 2017 QSAN Technology, Inc. All Right Reserved.