Table of Contents
Advertisement
3.4.
Start Up Your System
Before you power on your XCubeNAS for the first time, please make sure the following tasks
are done:
1. Connect at least one LAN cable to one of the LAN ports and the other end to your
switch, router, or hub.
2. Connect the AC adapter to the power port of the XCubeNAS. Connect one end of the AC
power cord to the AC power adapter, and the other to the power outlet.
3. Press the power button to turn on your XCubeNAS.
Your XCubeNAS is now online and detectable from a network computer.
INFORMATION:
The power cord rating is the minimum requirement. The rating of the
power cord that you purchase must equal to or be higher than the
minimum requirement to ensure the system safety and reliability.
19
Advertisement
Table of Contents
