Turning The Power On And Off (Setting The Default Language) - Hioki PQ3198-94 Instruction Manual

48

3.8 Turning the Power On and Off (Setting the Default Language)

3.8 Turning the Power On and Off (Setting the
Default Language)
Be sure to read the "Usage Notes" (p.7) before turning the instrument on.
Turn on the instrument after connecting the AC adapter, voltage cords, and current sensors.
Turning the power on
If the self-test fails, operation stops at the self-test screen. If the fault recurs after turn-
ing the power off and on, the instrument may be damaged. Perform the following proce-
dure:
1. Cancel measurement and disconnect the voltage cords and current sensors from
2. Disconnect the power cord, voltage cords, and current sensors from the instrument.
3. Contact your authorized Hioki distributor or reseller.
For best precision, allow at least 30 minutes warm-up before executing zero adjustment and measuring.
Turning the power off
Do not turn the instrument off with the voltage cords and current sensors connected to
the measurement line. Doing so may damage the instrument.
Turn the POWER switch on (
The instrument performs a 10-second power-on self test.
See: 3.3 (p.42)
After the self-test is complete, the
the measurement line before turning off the instrument's
Turn the POWER switch off (
After use, always turn OFF the power.
| ).
[SYSTEM]-[Wiring] screen will be displayed.
POWER
).
switch.