Network Scan - D-Link DWR-961 User Manual

Section 4 - Configuration
This page lets you set whether to allow the DWR-9
to manually scan for networks and select one to connect to.
Network Leave this setting on Auto to allow the DWR-9
Selection select a cellular network to connect to. If you need to select a
Method: network manually, select Manual, click the Scan button, then
select an available network to connect to.
Note: You will only be able to scan for networks if the DWR-9
not currently connected to a 4G network.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWR-9 User Manual

Network Scan

to automatically select a 4G network based on the inserted SIM/UICC card, and allows you
to automatically
is
53