Canon TX-3100 Online Manual page 412

Make sure wireless
signal is strong.
The number of con-
nected clients rea-
ches the upper limit.
The signal to noise
ratio (S/N ratio) is
low.
A link local address
is assigned.
The specified net- The network name (SSID) is not specified.
work name (SSID) is
Enter the network name (SSID) specified for the destination.
left default value.
Enter the correct security key.
• Make sure the printer is not placed too far away from the wireless router. •
• • Monitor signal status and move the printer and wireless router as necessary.
• • Wireless Direct does not allow more than 5 devices to be connected.
If you add a device to connect, disconnect a device you do not use before adding the
device.
• • There is a lot of noise from other devices.
Move the printer apart from other devices.
• Perform printer setup again.
• The security key specified for the wireless router may not match that you entered. •
The security key is case-sensitive.
Enter the correct security key.
412